Ritmo ALFA 400 CTB fitting fabrication welder (110-400mm)
Ritmo
Regular price
Sale
ALFA 400 CTB is a workshop welding machine designed to fabricate fittings by joining pipe segments, with the help of special jaws.
Elbows Ø 110 ÷ 400 mm (4" IPS ÷ 16" IPS)
Tees - Crosses - Wyes Ø 110 ÷ 355 mm (4" IPS ÷ 14" IPS)
Elbows and Wyes (Y) jaws opening/closing and locking movements are controlled hydraulically
Tees/Crosses jaws opening/closing movements are manual
The ALFA 400 CTB can also weld special and moulded fittings such as elbows, tees and flange necks, thanks to a different type of special jaws.
Composed of:
- A machine body with two hydraulically controlled carriages; a control panel that features the Easy Life system, thanks to which it is possible to carry out a whole welding cycle in a simple, intuitive and repeatable way, so that the operator’s interference would be reduced to the minimum. An built-in memory allows the machine to store 400 welding cycles (including the set diameters and SDR). It is possible to transfer the welding data to a PC through a serial port (USB adaptor connector available) and data-management software. A printer can be connected to the serial port, to get a welding report at the end of each welding cycle
- A Teflon-coated heating plate with hydraulic movement (in / out) on spherical bearings guides
- A milling cutter with hydraulic movement (in/out) on spherical bearings guides, operated by an electrical engine, provided with eight steel blades
- an upper cylinder, to be positioned on the jaws, for welding extra thick pipes and/or whenever it’s necessary to use high pressures
STANDARD COMPOSITION
- Machine body with control panel EASY LIFE
- Heating plate
- Milling cutter
- Upper cylinder and service tools
ON REQUEST (ACCESSORIES)
- Elbows jaws Ø 400 mm with lateral support inserts from Ø 110 to Ø 355 mm
- Tees/crosses jaws Ø 355 mm inserts from Ø 110 to Ø 315 mm
- Wyes jaws jaws Ø 355 mm inserts from Ø 110 to Ø 315 mm
- Right or left special jaws Ø 400 inserts from Ø 110 to Ø 355 mm
- Tool for flange necks
Technical features:
Materials | HDPE/PP |
Working range |
ELBOWS Ø 110 ÷ 400 mm (4" IPS ÷ 16" IPS) Y - TEES - CROSSES Ø 110 ÷ 355 mm (4" IPS ÷ 14" IPS) |
Welding system | EASY LIFE |
Memory | 400 reports |
Power supply | 400 V Three Phase 50/60 Hz |
Total absorbed power | 16000 W |
Working Temperature | 180° ÷ 280° C |
Weight | 1200 Kg |
Dimension | 2560x1725x1450 mm |