POLYFUSION 3-50 is a CNC automatic butt fusion machine, suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF.
POLYFUSION 3-50, besides operating to weld horizontally, allow you to perform different types of welds as circular and 90° thanks to special accessories available on request.
The machine is equipped with a control panel, which allows easily and safely setting and performance of the whole welding process.The butt fusion machine is also able to weld twin-wall HDPE and PP sheets. The machine can operate in compliance with the D.V.S. 2207.
Otherwise according to the user’s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld.
It is possible to pre-set 15 customized welding cycles. Each welding cycle is automatically memorized (4000 welding cycles) and it’s possible to save it and transfer the data thanks to an USB storage device.
The butt fusion machine is also able to weld twin-wall PE and PP sheets.
Weldable plastic thickness: 3 ÷ 50 mm the indicated maximum thickness can be welded with materials that require a maximum welding pressure not higher than 0.17 N/mm2; Max. weldable length: 3000 mm
Welding types: horizontal (standard composition); 90 degrees and circular (on request)
Technical features
| Materials |
HDPE/PP/PVDF/PVC |
|
Max.working width
|
3000 mm |
|
Min. weldable thickness
|
3 mm |
|
Max. weldable thickness
|
50 mm |
| Types of welding |
Plane, Circular*, 90° |
| Power supply |
400 V |
| Max. absorbed power |
12500 W |
| Pneumatic feed (for 90° welding) |
Tank 1000 lt – 0.78 m3/h at 6 bar compressor |
| Report |
PDF |
| Memory |
4000 cycles |
| Pre-set customized |
15 cycles |
| Dimensions folded brackets |
4200 x 1540 x 840 mm |
| Dimensions unfolded bracket |
4200 x 1540 x 1960 mm |
- The minimum diameter is calculated based on the geometric characteristics of the machine. The range of diameters that can be produced and their thickness are bound to the use of external
systems such as overhead cranes, forklifts etc. and the permissible strain of the outer fibers of the material. Refer to the material datasheet of the manufacturer for further information in this regard.
