Maximum performance
REMEDY 355 for a manual welding cycle in compliance with the International Standards ISO 21307 High Pressure and ASTM F2620. To certify your welds, you have the support of the innovative Datalogging Inspector 2.0 system and cloud-based data archiving/analysis.
SmartLock
The REMEDY 355 clamps are equipped with the SmartLock system (Ritmo Patent) which allows, without the use of any type of tool, to speed up the preparation times for welding with quick locking and release of reductions.
Easy to Use
REMEDY 355 is robust and reliable. With its 14 kW engine, you are ready for any terrain. With a full tank of diesel, you have an autonomy of over 12 hours and thanks to the tracks you can overcome slopes of 35%. With Remedy 355 you can weld HDPE and PP pipes Ø 125 ÷ 355 mm, 4" ÷ 14" IPS, 4" ÷ 12" DIPS.
Complete
The standard equipment of the Remedy 355 is rich. The presence of hydraulic roller, the hydraulic milling cutter, the facilitated insertion system for milling cutter - heating plate (Ritmo Patent) in addition to the welding area illuminated by high-intensity LEDs make the welder complete and functional.
Safe movements
The operator manually activates the advancement of the welder through special control levers. All of this takes place from a rear control position.
In-Ditch use
A few simple steps and the welding unit can be detached from the trolley to operate in-ditch. Dedicated cables and extensions up to 7 meters (on request) allow you to continue to remotely manage the welding cycle.
Easy Maintenance
The access to the compartments for the periodic maintenance that the operator can carry out completely independently are quick and easy to perform.
Shipping Flexibility
Thanks to its compact dimensions and lightweight, the Remedy 355 can be easily transported with a simple trolley.
Technical specifications
| Working range |
125 ÷ 355 mm; 4” IPS ÷ 14” IPS; 4” DIPS ÷ 12” DIPS |
| On board generator |
719 cc - 14 Kw |
| Fuel |
Diesel |
| Manual welding cycle |
Yes |
| Traceability GPS |
With Inspector 2.0 on request |
| Memory |
With Inspector 2.0 on request |
| Working temperature |
180° ÷ 260° C (356° ÷ 500° F) |
| Outside temperature range |
-5 ÷ +40°C (23 ÷ 104°F) |
| Pressure |
up to 150 bar |
| Fuel tank |
25 L (6.6 gal) |
| Autonomy |
12,5 hours |
| Max operating slope |
35% |
| Dimensions standard composition (W x D x H) |
3007 x 1479 x 1690 mm 9.86 x 4.85 x 5.54 ft |
| Weight standard composition |
1170 Kg (2579 lb) |
